Pipe Roller Series – Support with Metal Channel

  • Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.
  • Holes are 9/16″ [14.3] diameter, 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified

 

RSB – Roller Series with 1-5/8″ (41 mm) Pre-Galv or Hot Dip Galv Steel Channel With Rollers 
Part No.  No. of Bases  R Pipe Size (O.D.)  Height Height to Roller Center  Base Length  Strut Length  Weight Lbs  Uniform Load* Lbs
RSB R2010401016PG 1 1″ to 4″ 8-1/4″ 7-1/16″ 11″ 10″ 8.11 (3.7) 500 (2.2
RSB R2137401016PG 1 3-3/4 to 4″ 8-1/4″ 7-1/16″ 11″ 10″ 8.16 (3.7) 750 (3.3)
RSB R2143601016PG 1 4-3/8″ to 6″ 8-1/4″ 7-1/16″ 11″ 10″ 8.21 (3.7) 750 (3.3)
RSB R2163801016PG 1 6-3/8″ to 8″ 8-1/4″ 7-1/16″ 11″ 10″ 8.25 (3.7) 750 (3.3)
RSB2R2190101016PG 2 9″ to 10″ 8-1/4″ 7-1/16″ 25″ 24″ 14.19 (6.7) 750 (3.3)
* This load is only for the capacity of the components in this assembly
Please consult roofing manufacturer or engineer for roof load capacity

 

 

Finish – Fitting: PG – Pre-galvanized Zinc
ASTM A653 G-90 Pre-galvanized zinc is produced by continuously rolling steel coils or sheets through molten zinc at the mills. The coils or sheets are slit to size and fabricated by forming, shearing or punching to produce the finished product. During fabrication cut edges are not generally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov