Page 41 - Jetstream-Catalog-2016
P. 41

 Beam Clamps
Standard finish is Zinc Electroplate (EG) • Product finishes and materials are on page 10.
BC30
Strut to Beam Clamp Z-Type
3⁄8" [9.5] material thickness
BC40
Strut to Beam Clamp Window Type
1⁄2" - 13 Set Screw
Design load
950 Lbs [4.23 kN] when used in pairs
Index Technical Also Z-Fittings Wing U-Fittings Rollers Post Concrete Inserts Brackets Beam Angle Flat Conduit & Tubing Strut Hardware Channel General Data Available Fittings Bases & Electrical Clamps Fittings Fittings Clamps Clamps Nuts Info
Design load 600 Lbs [2.67 kN] when used in pairs
Clamp requires 1⁄2"-13 HCS and 1⁄2"channel nut, order separately
Catalog Number: BC300000EG Weight: 0.65 Lbs.
BC50
Strut to Beam Spreader Caps
Includes 1 adjustable cap and
1 nonadjustable cap, for use with 12 gauge strut
Cut strut length 11/4" to 15/8" shorter than the average distance between flanges.
Design load 500 Lbs [2.22 kN] when used as a set
Catalog Number: BC400000EG Weight: 1.06 Lbs.
BC51
Strut to Beam Spreader Caps
Includes 2 adjustable caps. For use with 12 gauge strut
Cut strut length 11/4" to 15/8" shorter than the average distance between flanges.
Design load 1000 Lbs [2.22 kN] when used as a set
2" [50.8]
Catalog Number: BC500000EG Weight: 0.54 Lbs.
Material is 15⁄8" [41.3] wide x 1⁄4" [6.3] thick unless specified.
Catalog Number: BC510000EG Weight: 1.40 Lbs.
Between Flanges
Between Flanges
1⁄2" - 13 Set Screw
Max Flange Thickness 1" [25.4]
1 5⁄8" [41.3]
Strut Length (See Note)
37⁄8"
15⁄8"
Strut Length (See Note)
Holes are 9⁄16" (14.3) diameter, 13⁄16" [20.6] center to edge on 17⁄8" [47.6] centers unless specified.
ENGINEERING CATALOG www.jetstr.com Page [41]
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

























































   39   40   41   42   43