Page 10 - Jetstream-Catalog-2016
P. 10

                   Dimension Information for R20, R21, R22 & R23.....................................................................74 - 75 Outside Diameter of Standard Pipe and Tubing ................................................................................ 76 Strut Clamp Sizing By Outside Diameter ......................................................................................... 77 General Information...............................................................................................................78 - 79 Alphabetical Product Index .....................................................................................................80 - 81 Terms and Conditions of Sale........................................................................................................ 82
MATERIAL SPECIFICATIONS AND FINISHES:
Note: Specifications subject to change without notice.
Carbon Steel – ASTM A1011-00 SS GR 33 or ASTM A1011-00CS Type B
304 Stainless Steel – ASTM A240 (Type 304)
316 Stainless Steel – ASTM A240 (Type 316)
316 Stainless Steel Nuts – ASTM A276-03
Aluminum – ASTM B209 (Type 5052-H32)
PL – Uncoated Carbon Steel
There is no coating on the steel except a possibility of some oil left on the part from the pickle and oil or fabrication process.
EG – Electroplated Zinc also known as Electro-Galvanized
This coating is standard for most Jet Stream products. Electro-Galvanized products meet ASTM B633 SC1 or SC3, Type III. Electroplating deposits zinc on the surface of the steel by electrolysis from a bath of zinc salts. This coating is recommended for relatively dry indoor use. The thickness of zinc applied in this method is between 0.2 mils to 0.5 mils [5.1 μm to 12.7 μm].
HD – Hot Dip Galvanized After Fabrication
The steel is zinc coated by hot dipping the fabricated product. The product is dipped in molten zinc and is completely covered on all surfaces. This coating is generally recommended for outdoor use. The coating meets either ASTM A123 with a 2.6 mils [65 μm] minimum average thickness or ASTM A153 with a 2.2 mils [56 μm] minimum average thickness.
YC – Yellow Zinc Dichromate
A 0.2 mil [5 μm] electro-galvanized zinc plating finished with a yellowish dichromate coating which meets ASTM B633 SC1 Type II. This yellowish colored coating improves corrosion resistance over colorless coatings, acts as a non-porous barrier and can be painted.
CP – Copper Zinc Dichromate
A 0.2 mil [5 μm] electro-galvanized zinc plating finished with a copper dichromate coating which meets ASTM B633 SC1 Type II. This copper colored coating improves corrosion resistance over colorless coatings and acts as a non-porous barrier that does not react adversely with copper pipe or tubing.
PC & GN - Powder Coat (Special Order)
A Polyester powder coating is electrostatically applied after fabrication. The powder is then baked on creating a 1.38 to 1.77 mil [35 – 45 μm] thick coating. The hardness of this coating meets ASTM D-3363-74, the impact rating meets ASTM D-2794-93 and the gloss meets ASTM D-523-85. This creates a coating that is resistant to chipping, peeling and corrosion. Available in many colors by special order
Page [10]   330-505-9988 ENGINEERING CATALOG
General Information













































































   8   9   10   11   12